# -*- coding: utf-8 -*-
####################################################################################################
#
# PySpice - A Spice Package for Python
# Copyright (C) 2014 Fabrice Salvaire
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
####################################################################################################
"""This module implements high level elements built on top of Spice elements."""
####################################################################################################
from ..Math import rms_to_amplitude, amplitude_to_rms
from ..Tools.StringTools import join_list, join_dict, str_spice
from ..Unit import as_s, as_V, as_A, as_Hz
from .BasicElement import VoltageSource, CurrentSource
####################################################################################################
[docs]class SourceMixinAbc:
__as_unit__ = None
####################################################################################################
[docs]class VoltageSourceMixinAbc:
__as_unit__ = as_V
####################################################################################################
[docs]class CurrentSourceMixinAbc:
__as_unit__ = as_A
####################################################################################################
[docs]class SinusoidalMixin(SourceMixinAbc):
r"""This class implements a sinusoidal waveform.
+------+----------------+---------------+-------+
| Name + Parameter + Default Value + Units |
+------+----------------+---------------+-------+
| Vo + offset + + V, A |
+------+----------------+---------------+-------+
| Va + amplitude + + V, A |
+------+----------------+---------------+-------+
| f + frequency + 1 / TStop + Hz |
+------+----------------+---------------+-------+
| Td + delay + 0.0 + sec |
+------+----------------+---------------+-------+
| Df + damping factor + 0.01 + 1/sec |
+------+----------------+---------------+-------+
The shape of the waveform is described by the following formula:
.. math::
V(t) = \begin{cases}
V_o & \text{if}\ 0 \leq t < T_d, \\
V_o + V_a e^{-D_f(t-T_d)} \sin\left(2\pi f (t-T_d)\right) & \text{if}\ T_d \leq t < T_{stop}.
\end{cases}
Spice syntax::
SIN ( Voffset Vamplitude Freq Tdelay DampingFactor )
Public Attributes:
:attr:`amplitude`
:attr:`damping_factor`
:attr:`dc_offset`
:attr:`delay`
:attr:`frequency`
:attr:`offset`
"""
##############################################
def __init__(self,
dc_offset=0,
offset=0, amplitude=1, frequency=50,
delay=0, damping_factor=0):
self.dc_offset = self.__as_unit__(dc_offset)
self.offset = self.__as_unit__(offset)
self.amplitude = self.__as_unit__(amplitude)
self.frequency = as_Hz(frequency) # Fixme: protect by setter?
self.delay = as_s(delay)
self.damping_factor = as_Hz(damping_factor)
##############################################
@property
def rms_voltage(self):
return amplitude_to_rms(self.amplitude)
##############################################
@property
def period(self):
return self.frequency.period
##############################################
####################################################################################################
[docs]class PulseMixin(SourceMixinAbc):
"""This class implements a pulse waveform.
Nomenclature:
+--------+---------------+---------------+-------+
| Name + Parameter + Default Value + Units |
+--------+---------------+---------------+-------+
| V1 + initial value + + V, A |
+--------+---------------+---------------+-------+
| V2 + pulsed value + + V, A |
+--------+---------------+---------------+-------+
| Td + delay time + 0.0 + sec |
+--------+---------------+---------------+-------+
| Tr + rise time + Tstep + sec |
+--------+---------------+---------------+-------+
| Tf + fall time + Tstep + sec |
+--------+---------------+---------------+-------+
| Pw + pulse width + Tstop + sec |
+--------+---------------+---------------+-------+
| Period + period + Tstop + sec |
+--------+---------------+---------------+-------+
| Phase + phase + 0.0 + sec |
+--------+---------------+---------------+-------+
Phase is only possible when XSPICE is enabled
Spice Syntax::
PULSE ( V1 V2 Td Tr Tf Pw Period Phase )
A single pulse so specified is described by the following table:
+-------------+-------+
| Time | Value |
+-------------+-------+
| 0 | V1 |
+-------------+-------+
| Td | V1 |
+-------------+-------+
| Td+Tr | V2 |
+-------------+-------+
| Td+Tr+Pw | V2 |
+-------------+-------+
| Td+Tr+Pw+Tf | V1 |
+-------------+-------+
| Tstop | V1 |
+-------------+-------+
Note: default value in Spice for rise and fall time is the simulation transient step, pulse
width and period is the simulation stop time.
Public Attributes:
:attr:`delay_time`
:attr:`fall_time`
:attr:`initial_value`
:attr:`period`
:attr:`phase`
:attr:`pulse_width`
:attr:`pulsed_value`
:attr:`rise_time`
"""
##############################################
def __init__(self,
initial_value, pulsed_value,
pulse_width, period,
delay_time=0, rise_time=0, fall_time=0,
phase=None):
# Fixme: default
# rise_time, fall_time = Tstep
# pulse_width, period = Tstop
self.initial_value = self.__as_unit__(initial_value)
self.pulsed_value = self.__as_unit__(pulsed_value)
self.delay_time = as_s(delay_time)
self.rise_time = as_s(rise_time)
self.fall_time = as_s(fall_time)
self.pulse_width = as_s(pulse_width)
self.period = as_s(period) # Fixme: protect by setter?
# XSPICE
if phase is not None:
self.phase = as_s(phase)
else:
self.phase = None
# # Fixme: to func?
# # Check parameters
# found_none = False
# for parameter in ('rise_time', 'fall_time', 'pulse_width', 'period'):
# parameter_value = getattr(self, parameter)
# if found_none:
# if parameter_value is not None:
# raise ValueError("Parameter {} is set but some previous parameters was not set".format(parameter))
# else:
# found_none = parameter_value is None
##############################################
@property
def frequency(self):
return self.period.frequency
##############################################
####################################################################################################
[docs]class ExponentialMixin(SourceMixinAbc):
r"""This class implements a Exponential waveform.
Nomenclature:
+------+--------------------+---------------+-------+
| Name + Parameter + Default Value + Units |
+------+--------------------+---------------+-------+
| V1 + Initial value + + V, A |
+------+--------------------+---------------+-------+
| V2 + pulsed value + + V, A |
+------+--------------------+---------------+-------+
| Td1 + rise delay time + 0.0 + sec |
+------+--------------------+---------------+-------+
| tau1 + rise time constant + Tstep + sec |
+------+--------------------+---------------+-------+
| Td2 + fall delay time + Td1+Tstep + sec |
+------+--------------------+---------------+-------+
| tau2 + fall time constant + Tstep + sec |
+------+--------------------+---------------+-------+
Spice Syntax::
EXP ( V1 V2 TD1 TAU1 TD2 TAU2 )
The shape of the waveform is described by the following formula:
Let V21 = V2 - V1 and V12 = V1 - V2.
.. math::
V(t) = \begin{cases}
V_1 & \text{if}\ 0 \leq t < T_{d1}, \\
V_1 + V_{21} ( 1 − e^{-\frac{t-T_{d1}}{\tau_1}} )
& \text{if}\ T_{d1} \leq t < T_{d2}, \\
V_1 + V_{21} ( 1 − e^{-\frac{t-T_{d1}}{\tau_1}} ) + V_{12} ( 1 − e^{-\frac{t-T_{d2}}{\tau_2}} )
& \text{if}\ T_{d2} \leq t < T_{stop}
\end{cases}
"""
##############################################
def __init__(self,
initial_value, pulsed_value,
rise_delay_time=.0, rise_time_constant=None,
fall_delay_time=None, fall_time_constant=None):
# Fixme: default
self.initial_value = self.__as_unit__(initial_value)
self.pulsed_value = self.__as_unit__(pulsed_value)
self.rise_delay_time = as_s(rise_delay_time)
self.rise_time_constant = as_s(rise_time_constant)
self.fall_delay_time = as_s(fall_delay_time)
self.fall_time_constant = as_s(fall_time_constant)
##############################################
####################################################################################################
[docs]class PieceWiseLinearMixin(SourceMixinAbc):
r"""This class implements a Piece-Wise Linear waveform.
Spice Syntax::
PWL( T1 V1 <T2 V2 T3 V3 T4 V4 ... > ) <r=value> <td=value>
Each pair of values (Ti , Vi) specifies that the value of the source is Vi (in Volts or Amps) at
time = Ti . The value of the source at intermediate values of time is determined by using linear
interpolation on the input values. The parameter r determines a repeat time point. If r is not
given, the whole sequence of values (Ti , Vi ) is issued once, then the output stays at its
final value. If r = 0, the whole sequence from time = 0 to time = Tn is repeated forever. If r =
10ns, the sequence between 10ns and 50ns is repeated forever. the r value has to be one of the
time points T1 to Tn of the PWL sequence. If td is given, the whole PWL sequence is delayed by a
delay time time = td. The current source still needs to be patched, td and r are not yet
available.
`values` should be given as a list of (`Time`, `Value`)-tuples, e.g.::
PieceWiseLinearVoltageSource(
circuit,
'pwl1', '1', '0',
values=[(0, 0), (10@u_ms, 0), (11@u_ms, 5@u_V), (20@u_ms, 5@u_V)],
)
"""
##############################################
def __init__(self, values, repeate_time=0, delay_time=.0):
# Fixme: default
self.values = sum(([as_s(t), self.__as_unit__(x)] for (t, x) in values), [])
self.repeate_time = as_s(repeate_time)
self.delay_time = as_s(delay_time)
##############################################
####################################################################################################
[docs]class SingleFrequencyFMMixin(SourceMixinAbc):
r"""This class implements a Single-Frequency FM waveform.
Spice Syntax::
SFFM (VO VA FC MDI FS )
+------+-------------------+---------------+-------+
| Name + Parameter + Default Value + Units |
+------+-------------------+---------------+-------+
| Vo + offset + + V, A |
+------+-------------------+---------------+-------+
| Va + amplitude + + V, A |
+------+-------------------+---------------+-------+
| Fc + carrier frequency + 1 / Tstop + Hz |
+------+-------------------+---------------+-------+
| Mdi + modulation index + + |
+------+-------------------+---------------+-------+
| Fs + signal frequency + 1 / Tstop + Hz |
+------+-------------------+---------------+-------+
The shape of the waveform is described by the following equation:
.. math::
V(t) = V_o + V_a \sin (2\pi F_c\, t + M_{di} \sin (2\pi F_s\,t))
"""
##############################################
def __init__(self, offset, amplitude, carrier_frequency, modulation_index, signal_frequency):
self.offset = self.__as_unit__(offset)
self.amplitude = self.__as_unit__(amplitude)
self.carrier_frequency = as_Hz(carrier_frequency)
self.modulation_index = modulation_index
self.signal_frequency = as_Hz(signal_frequency)
##############################################
####################################################################################################
[docs]class AmplitudeModulatedMixin(SourceMixinAbc):
r"""This class implements a Amplitude Modulated source.
+------+----------------------+---------------+-------+
| Name + Parameter + Default Value + Units |
+------+----------------------+---------------+-------+
| Vo + offset + + V, A |
+------+----------------------+---------------+-------+
| Va + amplitude + + V, A |
+------+----------------------+---------------+-------+
| Mf + modulating frequency + + Hz |
+------+----------------------+---------------+-------+
| Fc + carrier frequency + 1 / Tstop + Hz |
+------+----------------------+---------------+-------+
| Td + signal delay + + s |
+------+----------------------+---------------+-------+
Spice Syntax::
AM(VA VO MF FC TD)
The shape of the waveform is described by the following equation:
.. math::
V(t) = V_a (V_o + \sin (2\pi M_f\,t)) \sin (2\pi F_c\,t)
"""
##############################################
def __init__(self, offset, amplitude, modulating_frequency, carrier_frequency, signal_delay):
# Fixme: default
self.offset = self.__as_unit__(offset)
self.amplitude = self.__as_unit__(amplitude)
self.carrier_frequency = as_Hz(carrier_frequency)
self.modulating_frequency = as_Hz(modulating_frequency)
self.signal_delay = as_s(signal_delay)
##############################################
####################################################################################################
[docs]class RandomMixin(SourceMixinAbc):
r"""This class implements a Random Voltage source.
The TRRANDOM option yields statistically distributed voltage values, derived from the ngspice
random number generator. These values may be used in the transient simulation directly within a
circuit, e.g. for generating a specific noise voltage, but especially they may be used in the
control of behavioral sources (B, E, G sources, voltage controllable A sources, capacitors,
inductors, or resistors) to simulate the circuit dependence on statistically varying device
parameters. A Monte-Carlo simulation may thus be handled in a single simulation run.
Spice Syntax::
TRRANDOM( TYPE TS <TD <PARAM1 <PARAM2> > >)
TYPE determines the random variates generated: 1 is uniformly distributed, 2 Gaussian, 3
exponential, 4 Poisson. TS is the duration of an individual voltage value. TD is a time delay
with 0 V output before the random voltage values start up. PARAM1 and PARAM2 depend on the type
selected.
+-------------+---------------+---------+-------------+---------+
| Type + Parameter 1 + Default + Parameter 2 + Default |
+-------------+---------------+---------+-------------+---------+
| uniform + range + 1 + offset + 0 |
+-------------+---------------+---------+-------------+---------+
| gaussian + standard dev. + 1 + mean + 0 |
+-------------+---------------+---------+-------------+---------+
| exponential + mean + 1 + offset + 0 |
+-------------+---------------+---------+-------------+---------+
| poisson + lambda + 1 + offset + 0 |
+-------------+---------------+---------+-------------+---------+
"""
##############################################
def __init__(self, random_type, duration=0, time_delay=0, parameter1=1, parameter2=0):
# Fixme: random_type and parameters
self.random_type = random_type
self.duration = as_s(duration)
self.time_delay = as_s(time_delay)
self.parameter1 = parameter1
self.parameter2 = parameter2
##############################################
####################################################################################################
[docs]class SinusoidalVoltageSource(VoltageSource, VoltageSourceMixinAbc, SinusoidalMixin):
r"""This class implements a sinusoidal waveform voltage source.
See :class:`SinusoidalMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
VoltageSource.__init__(self, netlist, name, node_plus, node_minus)
SinusoidalMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = SinusoidalMixin.format_spice_parameters
####################################################################################################
[docs]class SinusoidalCurrentSource(CurrentSource, CurrentSourceMixinAbc, SinusoidalMixin):
r"""This class implements a sinusoidal waveform current source.
See :class:`SinusoidalMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
CurrentSource.__init__(self, netlist, name, node_plus, node_minus)
SinusoidalMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = SinusoidalMixin.format_spice_parameters
####################################################################################################
[docs]class AcLine(SinusoidalVoltageSource):
##############################################
def __init__(self, netlist, name, node_plus, node_minus, rms_voltage=230, frequency=50):
super().__init__(netlist, name, node_plus, node_minus,
amplitude=rms_to_amplitude(rms_voltage),
frequency=frequency)
####################################################################################################
[docs]class PulseVoltageSource(VoltageSource, VoltageSourceMixinAbc, PulseMixin):
r"""This class implements a pulse waveform voltage source.
See :class:`PulseMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
VoltageSource.__init__(self, netlist, name, node_plus, node_minus)
PulseMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = PulseMixin.format_spice_parameters
####################################################################################################
[docs]class PulseCurrentSource(CurrentSource, CurrentSourceMixinAbc, PulseMixin):
r"""This class implements a pulse waveform current source.
See :class:`PulseMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
CurrentSource.__init__(self, netlist, name, node_plus, node_minus)
PulseMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = PulseMixin.format_spice_parameters
####################################################################################################
[docs]class ExponentialVoltageSource(VoltageSource, VoltageSourceMixinAbc, ExponentialMixin):
r"""This class implements a exponential waveform voltage source.
See :class:`ExponentialMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
VoltageSource.__init__(self, netlist, name, node_plus, node_minus)
ExponentialMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = ExponentialMixin.format_spice_parameters
####################################################################################################
[docs]class ExponentialCurrentSource(CurrentSource, CurrentSourceMixinAbc, ExponentialMixin):
r"""This class implements a exponential waveform current source.
See :class:`ExponentialMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
CurrentSource.__init__(self, netlist, name, node_plus, node_minus)
ExponentialMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = ExponentialMixin.format_spice_parameters
####################################################################################################
[docs]class PieceWiseLinearVoltageSource(VoltageSource, VoltageSourceMixinAbc, PieceWiseLinearMixin):
r"""This class implements a piece wise linear waveform voltage source.
See :class:`PieceWiseLinearMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
VoltageSource.__init__(self, netlist, name, node_plus, node_minus)
PieceWiseLinearMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = PieceWiseLinearMixin.format_spice_parameters
####################################################################################################
[docs]class PieceWiseLinearCurrentSource(CurrentSource, CurrentSourceMixinAbc, PieceWiseLinearMixin):
r"""This class implements a piece wise linear waveform current source.
See :class:`PieceWiseLinearMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
CurrentSource.__init__(self, netlist, name, node_plus, node_minus)
PieceWiseLinearMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = PieceWiseLinearMixin.format_spice_parameters
####################################################################################################
[docs]class SingleFrequencyFMVoltageSource(VoltageSource, VoltageSourceMixinAbc, SingleFrequencyFMMixin):
r"""This class implements a single frequency FM waveform voltage source.
See :class:`SingleFrequencyFMMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
VoltageSource.__init__(self, netlist, name, node_plus, node_minus)
SingleFrequencyFMMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = SingleFrequencyFMMixin.format_spice_parameters
####################################################################################################
[docs]class SingleFrequencyFMCurrentSource(CurrentSource, CurrentSourceMixinAbc, SingleFrequencyFMMixin):
r"""This class implements a single frequency FM waveform current source.
See :class:`SingleFrequencyFMMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
CurrentSource.__init__(self, netlist, name, node_plus, node_minus)
SingleFrequencyFMMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = SingleFrequencyFMMixin.format_spice_parameters
####################################################################################################
[docs]class AmplitudeModulatedVoltageSource(VoltageSource, VoltageSourceMixinAbc, AmplitudeModulatedMixin):
r"""This class implements a amplitude modulated waveform voltage source.
See :class:`AmplitudeModulatedMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
VoltageSource.__init__(self, netlist, name, node_plus, node_minus)
AmplitudeModulatedMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = AmplitudeModulatedMixin.format_spice_parameters
####################################################################################################
[docs]class AmplitudeModulatedCurrentSource(CurrentSource, CurrentSourceMixinAbc, AmplitudeModulatedMixin):
r"""This class implements a amplitude modulated waveform current source.
See :class:`AmplitudeModulatedMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
CurrentSource.__init__(self, netlist, name, node_plus, node_minus)
AmplitudeModulatedMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = AmplitudeModulatedMixin.format_spice_parameters
####################################################################################################
[docs]class RandomVoltageSource(VoltageSource, VoltageSourceMixinAbc, RandomMixin):
r"""This class implements a random waveform voltage source.
See :class:`RandomMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
VoltageSource.__init__(self, netlist, name, node_plus, node_minus)
RandomMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = RandomMixin.format_spice_parameters
####################################################################################################
[docs]class RandomCurrentSource(CurrentSource, CurrentSourceMixinAbc, RandomMixin):
r"""This class implements a random waveform current source.
See :class:`RandomMixin` for documentation.
"""
##############################################
def __init__(self, netlist, name, node_plus, node_minus, *args, **kwargs):
CurrentSource.__init__(self, netlist, name, node_plus, node_minus)
RandomMixin.__init__(self, *args, **kwargs)
##############################################
format_spice_parameters = RandomMixin.format_spice_parameters