#r# ======================
#r#  AC Coupled Amplifier
#r# ======================

#r# This example shows the simulation of an AC coupled amplifier using a NPN bipolar transistor.

####################################################################################################

import matplotlib.pyplot as plt

####################################################################################################

import PySpice.Logging.Logging as Logging
logger = Logging.setup_logging()

####################################################################################################

from PySpice.Doc.ExampleTools import find_libraries
from PySpice import SpiceLibrary, Circuit, Simulator, plot
from PySpice.Unit import *

####################################################################################################

libraries_path = find_libraries()
spice_library = SpiceLibrary(libraries_path)

####################################################################################################

#f# circuit_macros('ac-coupled-amplifier.m4')

circuit = Circuit('Transistor')

circuit.V('power', 5, circuit.gnd, 15@u_V)
source = circuit.SinusoidalVoltageSource('in', 'in', circuit.gnd, amplitude=.5@u_V, frequency=1@u_kHz)
circuit.C(1, 'in', 2, 10@u_uF)
circuit.R(1, 5, 2, 100@u_kΩ)
circuit.R(2, 2, 0, 20@u_kΩ)
circuit.R('C', 5, 4, 10@u_kΩ)
circuit.BJT(1, 4, 2, 3, model='bjt') # Q is mapped to BJT !
circuit.model('bjt', 'npn', bf=80, cjc=pico(5), rb=100)
circuit.R('E', 3, 0, 2@u_kΩ)
circuit.C(2, 4, 'out', 10@u_uF)
circuit.R('Load', 'out', 0, 1@u_MΩ)

####################################################################################################

figure, ax = plt.subplots(figsize=(20, 10))

# .ac dec 5 10m 1G

simulator = Simulator.factory()
simulation = simulator.simulation(circuit, temperature=25, nominal_temperature=25)
analysis = simulation.transient(step_time=source.period/200, end_time=source.period*2)

ax.set_title('')
ax.set_xlabel('Time [s]')
ax.set_ylabel('Voltage [V]')
ax.grid()
ax.plot(analysis['in'])
ax.plot(analysis.out)
ax.legend(('input', 'output'), loc=(.05,.1))

plt.tight_layout()
plt.show()

#f# save_figure('figure', 'ac-coupled-amplifier-plot.png')

8.20.1. AC Coupled Amplifier

This example shows the simulation of an AC coupled amplifier using a NPN bipolar transistor.

import matplotlib.pyplot as plt


import PySpice.Logging.Logging as Logging
logger = Logging.setup_logging()


from PySpice.Doc.ExampleTools import find_libraries
from PySpice import SpiceLibrary, Circuit, Simulator, plot
from PySpice.Unit import *


libraries_path = find_libraries()
spice_library = SpiceLibrary(libraries_path)
../../_images/ac-coupled-amplifier.png 
circuit = Circuit('Transistor')

circuit.V('power', 5, circuit.gnd, 15@u_V)
source = circuit.SinusoidalVoltageSource('in', 'in', circuit.gnd, amplitude=.5@u_V, frequency=1@u_kHz)
circuit.C(1, 'in', 2, 10@u_uF)
circuit.R(1, 5, 2, 100@u_kΩ)
circuit.R(2, 2, 0, 20@u_kΩ)
circuit.R('C', 5, 4, 10@u_kΩ)
circuit.BJT(1, 4, 2, 3, model='bjt') # Q is mapped to BJT !
circuit.model('bjt', 'npn', bf=80, cjc=pico(5), rb=100)
circuit.R('E', 3, 0, 2@u_kΩ)
circuit.C(2, 4, 'out', 10@u_uF)
circuit.R('Load', 'out', 0, 1@u_MΩ)


figure, ax = plt.subplots(figsize=(20, 10))

# .ac dec 5 10m 1G

simulator = Simulator.factory()
simulation = simulator.simulation(circuit, temperature=25, nominal_temperature=25)
analysis = simulation.transient(step_time=source.period/200, end_time=source.period*2)

ax.set_title('')
ax.set_xlabel('Time [s]')
ax.set_ylabel('Voltage [V]')
ax.grid()
ax.plot(analysis['in'])
ax.plot(analysis.out)
ax.legend(('input', 'output'), loc=(.05,.1))

plt.tight_layout()
plt.show()
../../_images/ac-coupled-amplifier-plot.png